How can you tell if the conditions are good for surfing?

Comment savoir si les conditions sont bonnes pour aller surfer ?

A one-meter swell, a 12-second period, light offshore wind, and a rising tide: on paper, the conditions look perfect. Yet once you get to the beach, the waves may be too big, close out along their entire length, or barely break at all.

That’s the tricky part about surf forecasts. A good session never depends on just one number. Swell height, period, direction, wind, and tide all need to work together. And conditions that are perfect for an experienced surfer can be far too challenging for someone just getting into surfing.

Here’s how to read the forecast, spot the best windows, and choose waves that suit your ability.

Surf conditions at a glance

General guidelines for an exposed Atlantic coast beach break; adapt them to each spot.

Parameter

Conditions to look for

Swell

A swell size suited to your ability

Period

Often 9 to 13 s for manageable conditions, depending on the size

Direction

Swell direction suited to the spot

Wind

Light or slightly offshore

Tide

A favorable time for the spot’s seabed

Safety

Currents, sets, and depth suited to your ability

Heads up: these aren’t safety thresholds. A small swell with a long period can produce particularly powerful waves.

1. The 5 parameters to check before a surf session

Swell height: don’t confuse it with wave height

First thing to do before surfing: check the forecast swell height. This is the height of the undulations measured or estimated offshore, usually expressed in meters.

But a one-meter swell doesn’t always produce one-meter waves at the shore.

As it approaches the coast, the swell encounters increasingly shallow water. Its energy is concentrated, its height can increase, and the wave eventually breaks. This is known as shoaling.

The shape of the seabed, the coastline’s orientation, and the period all directly influence this phenomenon.


So two beaches just a few kilometers apart can have very different conditions, despite having exactly the same offshore forecast.

At an exposed beach break, a one-meter swell can produce some great waves. At a spot sheltered by a rocky headland, the same swell may go almost unnoticed.

The right move: check both the swell height offshore and the estimated wave height at the surf spot, when available.

Period: understanding wave power

The swell period is the time between two successive crests. It’s measured in seconds.

This is one of the clearest indicators of a session’s potential power.

A one-meter swell with a 7-second period won’t behave the same way as a one-meter swell with a 15-second period. At the same height, the latter generally carries more energy and interacts with the seabed farther from shore.

Understanding the different periods

6 to 8 seconds - Short-period swell
Waves are often close together and can get messy when there’s active local wind.

9 to 11 seconds - Mid-period swell
Can offer a good balance of organization and power as you progress.

12 to 15 seconds - Long-period swell
Potentially more powerful waves, with sets that can catch you off guard.

Over 15 seconds - Extra caution
Potentially high energy, even when the forecast height seems modest.

Long-period swell producing powerful wavesThese categories are practical guidelines, not universal thresholds. Swell height and the spot’s setup still matter.

A common mistake is to assume that a long period automatically means great waves. On some sandbars, a very long-period swell can produce waves that close out all at once over several dozen meters.

Conversely, a shorter-period swell can produce fun waves at a small, well-oriented beach.

MDNS Tip

If you’re a beginner, never choose your session based solely on the forecast wave height. An 80 cm swell with a 16-second period can be far more impressive than a one-meter swell with an 8-second period. Always check the size of the biggest sets before paddling out.

Swell direction: find out whether your spot picks up the waves

A swell can be forecast at two meters offshore without producing any worthwhile waves at your beach.

Why? Because sometimes it comes from a direction that the spot doesn’t pick up well.

Forecasts generally show the direction the swell is coming from: northwest, west, southwest, and so on.

A west-facing beach generally picks up western swells well. However, a headland, an island, or a breakwater can shelter part of the coastline and greatly reduce wave size.

On the Basque coast, this exposure helps explain why two nearby surf spots can have very different conditions at the same time.

You also need to consider secondary swells. A clean main swell can cross another swell coming from a different direction and make the water less consistent.

Before heading out, check the direction of the main swell, any secondary swells and the actual orientation of your beach.

Wind: offshore, onshore or side-shore?

Offshore wind
Hollow wave with spray blown offshore
Often sought after

It blows from land towards the ocean. When light, it can smooth the water’s surface, delay the break and improve wave shape.

Caution: strong offshore wind can make paddling harder and make it difficult to catch waves.

Onshore wind

Choppy water in onshore wind

Often poor conditions

It blows from the ocean towards land. As it picks up, it creates chop and can make the waves harder to read.

Very light onshore wind can still make for an enjoyable session, especially in small waves.

Side-shore wind

Waves exposed to cross-shore wind

Assess based on its strength

It blows parallel to the coast or has a strong cross-shore component.

It can distort the waves, make positioning harder and increase drift. However, light wind doesn’t necessarily mean you can’t surf.

Wind strength matters just as much as direction. Here are a few general guidelines to help you interpret the forecast.

Wind strength

Possible effect

0 to 5 knots

Very light wind, often favorable

5 to 10 knots

Good conditions depending on the direction

10 to 15 knots

Noticeable impact on the waves and paddling

Over 15 knots

Potentially challenging conditions, especially for beginners

One knot equals about 1.85 km/h.

On Atlantic beaches, thermal breezes can change conditions throughout the day. A clean session in the morning can get choppy a few hours later.

The tide: why it completely changes a surf spot

The tide affects the water depth over sandbanks, rocks and reefs. It therefore changes where waves break, their shape and sometimes their power.

Beach at low tide with visible sandbanks

At low tide

Some sandbanks produce hollower waves. But shallow water can make wipeouts more dangerous.

Waves breaking near the shore at high tide

At high tide

Some breaks become more accessible, while others barely break at all or produce powerful shorebreak.

2. What are the right surfing conditions for your level?

A perfect session for an experienced surfer isn’t necessarily a good session for improving.

Choosing which waves to surf should take into account how comfortable you are paddling, your ability to get through the break, your control of your lines, and your knowledge of the break.

Level

Conditions to look for

Avoid

Beginner

Small, gentle waves, consistent whitewater, light winds, sandy bottom

Big sets, currents, shorebreak

Intermediate

Consistent waves for working on your lines and turns

Waves that consistently close out, a break that’s too challenging to get through

Advanced

Conditions suited to your technical goals and knowledge of the break

Conditions beyond your experience or with hazards you can’t manage

Beginner: stick to small, consistent waves

For your first sessions, look for a patrolled beach with a sandy bottom and waves small enough to practice your takeoffs without spending all your time fighting the ocean.

Whitewater is often the best place to learn. It lets you work on your position on the board, paddling, and takeoff before moving on to unbroken waves.

A long, wide, high-volume foam board generally offers more stability and makes catching your first waves easier. 

Don’t assume a small swell means it’s safe: also check for currents and the biggest waves in each set.

Intermediate: look for waves that open up

Once you start catching unbroken waves and following their shoulders, the quality of their break becomes especially important.

Look for waves that peel gradually to the right or left rather than sections that close out all at once.

A moderate swell, an intermediate period, and light winds can provide excellent conditions for working on your turns and improving your wave reading.

It can also be worth switching boards depending on your plans. A softboard suited to progression lets you keep paddling easily while working on your lines.

Advanced: anticipating the waves’ true energy

As your level improves, you can look for faster, hollower, or more powerful waves.

But size alone still isn't enough. A long-period swell, a pronounced sandbank, and low tide can turn an apparently reasonable forecast into challenging conditions.

At an unfamiliar spot, take the time to watch the sets, currents, and channels out. Even with experience, some conditions are a good reason to call it off.

L's take — Progress without skipping steps

Choose conditions that let you catch several waves, rather than a session spent mostly getting through the break. Repeating good takeoffs and controlled lines is a great way to build lasting progress.

3. How to read surf forecasts without getting it wrong

Forecasting apps sometimes show dozens of data points. But just a few details are enough to make an initial assessment.

Start by checking the swell height, period, and direction. Then check the wind speed and direction, followed by the tide times.

Three examples to help you understand forecasts

Scenario 1 — Accessible small waves
80 cm swell, 10 s period, light wind

Small, clean waves on a sandy beach

On an exposed beach with suitable sandbanks, these conditions can offer an enjoyable session for an improving surfer.

Beginners should still check the wave size at the shore and watch out for currents.


Scenario 2 — Deceptive conditions
1 m swell, 16 s period, offshore wind

Hollow, powerful wave breaking over a sandbank

The numbers may look enticing. But the long period can produce powerful sets and waves much bigger than expected.

On a shallow sandbank, the waves can break quickly and be especially challenging.


Scenario 3 — Swell is up, but conditions are poor

1.5 m swell, 8 s period, steady onshore wind

Disorganized waves in a steady onshore wind

The forecast height isn't lacking, but the waves may be close together, disorganized, and hard to read.

Sometimes it's better to look for a beach sheltered from the wind, as long as it still picks up enough swell.

Fictional educational examples, not linked to an actual forecast. Conditions always depend on the spot and the tide.

Why don't forecasts always match reality?

A forecast is an estimate based on weather and ocean models. It is not an exact measurement of every wave that will reach your beach.

Several factors can explain the differences: an underestimated secondary swell, local changes in the wind, a sandbank that has changed shape, or a spot exposure that isn't accurately represented.

Storms can also reshape the seabed and shift sandbanks. A spot that worked perfectly the previous week may become far less appealing, even in seemingly similar conditions.

To improve your read of the conditions, compare forecasts with what you see on site. Note the differences and gradually learn to recognize the quirks of your regular spots.

Don't rely solely on stars or ratings from apps. A high rating for a spot may mean waves that are completely unsuitable for your level.

4. What's the best time of day to surf?


Morning: often promising, but not always

On some coasts, the first few hours of the day regularly bring lighter winds before a thermal breeze sets in.

This can create clean waves and a relatively smooth surface.

But sunrise is no guarantee. If a weather system brings strong winds overnight, conditions may already be poor in the morning.

So check the hourly forecasts rather than always heading out at the same time.

Later in the day: keep an eye on the wind

When the land heats up faster than the ocean, a sea breeze can develop and strengthen the onshore wind.

The waves can then become less consistent.

Conversely, some weather patterns can keep winds light or favorable throughout the day. There is no rule that applies to every beach.

Evening: making the most of a possible lull

At the end of the day, reduced heating of the land can weaken the sea breeze and improve conditions.

However, this phenomenon depends on local weather.

Before planning a sunset session, check the timings, tide and visibility. Don't paddle out if you might have to get back in the dark.

How do you combine wind and tide?

The best window is when several factors become favorable at the same time.

Imagine a spot that works particularly well at mid-rising tide. The tide becomes favorable around 9 a.m., while the wind stays light until 11 a.m.

The promising window is probably during this period. If the ideal tide comes in at 3 p.m. with a steady onshore wind, conditions may be less pleasant.

MDNS tip — Plan two time slots

When you check the forecast the day before, pick a first time slot and a backup option. That way, an unexpected change in wind or swell size won’t leave you scrambling at the last minute.

5. How do you check conditions before getting in the water?

Even when the forecast looks great, take the time to watch the ocean from the beach.

Watch several sets, not just the first waves you see. Bigger ones can arrive after several minutes of calm.

Look for areas where the waves peel, where they close out, and where experienced surfers enter and leave the water. Their presence is no guarantee of safety, though.

Spotting currents and hazards

Rip currents can form between two breaking zones. They sometimes appear as a strip of choppy water or, conversely, as an apparently calmer area between the waves.

Other clues include a difference in color, foam moving offshore, or a channel between sandbars.

These signs aren’t always visible. So an area without waves isn’t necessarily a safe way through.

Also check for rocks, the depth of the seabed, any swimming restrictions, and the lifeguards’ instructions.

If you get caught in a rip current, don’t fight it directly until you’re exhausted. Stay calm, signal for help if needed, and if you’re able, try to reach a less exposed area by swimming parallel to the shore.

Signs that mean you should stay out

A wave that’s too big for your level, strong currents, poor visibility, a nearby storm, or waves far beyond your experience are all reasons to postpone your session.

If you’re new to a spot, ask the lifeguards or a local surf school for advice. And when conditions are uncertain, choose a lifeguarded beach and don’t go out alone.

6. What gear should you choose for the surf conditions?

Good conditions alone aren’t enough to guarantee an enjoyable session. Your gear also needs to suit the water temperature, your level, and the waves you’re looking for.

Choose a board suited to the waves

In small surf, a board with enough volume generally makes paddling easier and helps you catch waves earlier.

Depending on their shape and volume, softboards are especially useful for learning and for small-wave sessions.

A shortboard with low volume can be harder to use when the waves lack power.

Choosing a wetsuit for the water temperature

Water temperature has a direct impact on your comfort, endurance and session length.

A wetsuit that’s too thin can lead to rapid heat loss, while one that’s too thick can restrict movement and increase paddling fatigue.

Here are a few general guidelines to adjust based on how sensitive you are to the cold, the wind and the planned session length.

Water temperature

Suggested gear

Above 22 °C

Rash guard, shorty or light protection depending on conditions

18 to 22 °C

Shorty or 2/2 to 3/2 mm wetsuit

14 to 18 °C

3/2 to 4/3 mm wetsuit

10 to 14 °C

4/3 to 5/4 mm wetsuit and accessories as needed

Below 10 °C

Suitable winter gear and extra precautions

A well-fitting wetsuit limits excessive water flushing and keeps you warmer.

Get ready for sessions all year round with MDNS surf wetsuits.

L’s take — Cold conditions change your session too

Don’t choose your wetsuit based only on water temperature. A cold wind, a long session or a long wait in the lineup can make you feel colder. If you start shivering or lose dexterity, get out of the water.

7. A quick way to decide whether to surf

Before loading your board, run through these six points.

Pre-session checklist

Check off the points you’ve verified. This list helps you prepare for your session, but doesn’t replace checking conditions on site.

A good session starts with the forecast, but the real test is always out on the ocean. With experience, you’ll learn to recognize the combinations of swell, wind and tide that make your favorite spots work.

And sometimes, the best decision is to wait a few hours for waves that really make you want to paddle out.

SEO FAQ - Surf conditions

Also read:

View all items
Key Lock Premium MDNS : surfer l’esprit libre

Premium MDNS Key Lock: surf with peace of mind

Where should you keep your keys when you head out surfing? The MDNS Premium Key Lock is the perfect way to keep your keys safe and enjoy the ocean with peace of mind starting April 7.

MDNS HD CORE : la softboard idéale pour débuter le surf en toute confiance

MDNS HD CORE: the ideal softboard for learning to surf with confidence

The MDNS HD CORE is the ideal board for learning to surf: stable, easy to handle, and designed to help you progress quickly with confidence.

New Surf Rack Mini for Bike : la solution idéale pour transporter sa planche de surf à vélo

New Mini Surf Rack for Bikes: the ideal solution for transporting your surfboard by bike

The New Surf Rack Mini for Bike is the ideal solution for carrying your surfboard by bike. Compact, practical, and easy to install, it’s a perfect fit for city and electric bikes, including those f...